Hot Filling Bottle Automatic Blow Moulding Machine

This machine is suitable for making hot filling bottles such as juice, tea etc.

Optimization design of a integrated templates, high strength, using lifetime.

Template precision machining, running rapid and stable.

Can add high pressure gas recovery device as low pressure use.

Frequency conversion constant temperature and layered heating system make heating equality, finishad product stable.

Auto-fault detection.

Modular design.

High cost formance, for variety bottles in one machine.

Technical Specification :

Hot Filling Bottle Automatic Blow Moulding Machine
Category Item Unit YV-1500R-1 YV-1500R-2
Product specification Max volume ML 1500
Output pcs 1000 2000
Body diameter mm 120
Bottle height mm 320
Neck diameter mm 14-38 14-38
Mold Cavity cavity 2 4
Clamping stroke mm 140 220
Max Strtch stroke mm 320
Bottom Moving stroke mm 80
Clamping force T 18 48
Power Votage standard 220/380/415V
50/60HZ
3phase
Total power kw 30 64
Actual use power kw 14 26
Air source HP air compressor 8.0 M3/min
3.0Mpa
8.0 M3/min
3.0Mpa
LP air compressor 1.6 M3/min
1.0Mpa
1.6 M3/min
1.0Mpa
Air tank 2.0 M3/min
3.0Mpa
2.0 M3/min
3.0Mpa
Air dryer 2.0 M3/min
3.0Mpa
2.0 M3/min
3.0Mpa
Machine specification MachineL×W×H m 2.4*2.1*2.5 4*2*2.5
Machine weight kg 2500 6000
Preform loaderL×W×H m 2*1.1*2.5 2*1.1*2.5
Loader weight kg 250

Actual output depend on bottle shape and perform qualification.The above technical parameters are subject to continual update, please rake the product as the base.